POWER AGM Dual Purpose Deep Cycle series batteries are an absorbed glass mat (AGM) sealed, maintenance-free battery featuring several design elements to provide optimum performance. Robust plates extend the life cycle of Power AGM Dual Purpose Batteries. A separator of glass fibres serves to isolate the positive and negative plates while acting as a pad to absorb the electrolyte. The separator is maintained under compression between plates to assure contact with plate surfaces. A computer-generated grid design is optimized for high-power density. Low calcium grid alloy reduces gas emissions and a flame arresting; one-way pressure relief vent prevents buildup of excessive pressure. Power AGM Dual Purpose Batteries are low temperature tolerant, shock and vibration resistant and have a low internal resistance for higher discharge current and higher charging efficiency. Designed with advanced battery technology, Power AGM Dual Purpose Batteries deliver dependable power with long battery life.<\/p>\n
Special Features:<\/strong><\/p>\n Valve regulated maintenance free design (AGM battery), long service life, suitable for deep cycle use:<\/strong><\/p>\n The electrolyte is adsorbed in the AGM separator, so there is no liquid electrolyte inside the battery, this can reduce acid stratification and prolong service life.\u00a0The safety valve keeps a certain pressure inside the battery, and the hydrogen and oxygen produced are compounded into water inside, which greatly reduces the water loss.\u00a0Valve regulated maintenance free design (AGM battery), long service life, suitable for deep cycle use:<\/p>\n Special grid for deep cycle batteries:<\/strong><\/p>\n Thickened and dense rib design, excellent corrosion resistance.<\/p>\n Rounded and chamfered design of the grid will not pierce the separator and cause short circuit of the battery.<\/p>\n Roughened surface of cast grid for tighter bonding with paste<\/p>\n Special grid alloy formula, great corrosion resistance<\/p>\n \u00a0Optimized for deep cycle conditions<\/strong><\/p>\n Add high strength fibres to enhance active material binding force<\/p>\n Add 4BS crystal seed and use high temperature commix paste process to increase the 4BS skeleton content in the plate, to enhance the life of the active material.<\/p>\n High temperature solidify process to increase the corrosion layer on the surface of the plate grid and improve the bonding strength of the active material to the plate grid.<\/p>\n \u00a0Dedicated AGM separator<\/strong><\/p>\n Tightly wrapped plate to avoid the active material shedding<\/p>\n Highly acid absorbing type AGM separator, which can absorb more electrolyte in the same volume and prolong service life.<\/p>\n Thicker separator and use high strength fibres for better resistance to pulling and puncturing, preventing breakage and punctured short circuit.<\/p>\n Product details<\/p>\n <\/p>\n Warranty Terms<\/strong><\/p>\n The following conditions constitute abusive applications and will void the warranty:<\/p>\n 1. Extreme Vibration applications (i.e., vibrating compactors, concrete cutters) The following examples may void your battery warranty Terminal damage: Damaged Batteries.<\/p>\n Customers maintain the right to inspect and refuse delivery of their battery if they suspect it is damaged.<\/p>\n Please note that by signing for your battery delivery, you have confirmed it has arrived in good order and condition.<\/p>\n If the battery delivery has been left without a signature, please contact us within 2 business to lodge a return or refund request.<\/p>\n *Please note that currently we can only deliver this battery to metro postcodes listed below in Brisbane, Sydney, Melbourne, Perth and Darwin.<\/p>\n QLD: 4000-4209 NSW: 2745-2786 VIC: 3000-3341 WA: 6000-6214 NT: 0800-0821\n
\n
\n2. Dropping or hitting the battery
\n3. Overcharging battery via faulty regulator or dual battery setup not using the approved management system
\n4. Using Starter battery for deep cycle applications (Car Audio Systems, Trolling Motors, refrigerators)
\n5: Undercharging or over-discharging a battery.<\/p>\n
\nCase and cover damage:
\nCracks or holes in case\/cover
\nMissing label
\nBent cover
\nShaved or cut cover\/case
\nWarped or bubbled cover<\/p>\n
\nMelted, bent or broken terminals
\nShaved or cut terminals
\nSunken or raised terminals<\/p>\n
\n4280-4347
\n4500-4521
\n9000-9464<\/p>\n
\n2555-2574
\n1001-2234<\/p>\n
\n3427-3442
\n3750-3810
\n3910-3920
\n3926-3981
\n8001-8627<\/p>\n
\n6800-6997<\/p>\n
\n0828-0834<\/p>\n","protected":false},"excerpt":{"rendered":"NPCDP12VDC31A POWER AGM DUAL PURPOSE SERIES DEEP CYCLE STARTING BATTERY<\/h4>\n
\n